Calendar Thursday, September 02, 2010
Text Size
   
Home Products Select a Product CS-440 Fuel & Oil Resistant Sealant
CS-440 Fuel & Oil Resistant Sealant Print E-mail

APPLICATIONS

For above and below ground fuel containment structures.  

SEALING PROPERTIES 

  • Provides permanently flexible watertight joints.
  • Excellent adhesion and structural integrity.
  • Bonds well to most surfaces, including: Concrete, Fiberglass, Metal, Plastic and aluminum.
  • Sealed Joints will not shrink, harden or oxide upon aging.
  • Controlled flow  resistance for application ease.
  • Low to high temperature workability: 20°F to 120°F (-7°C to 48°C)
  • Rugged service temperature: -30°F to +200°F (-34°C to +93°C)
  • No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application 

PHYSICAL PROPERTIES 

Specific Gravity, 77°F                                     ASTM D71     1.40 -1.45
Ductility, 77°F                                                  ASTM D113    15.0
Softening point, ring and ball °F                 ASTM D36     350°F (177°C)          
Penetration, cone 77°F, 150 gm. 5 sec.   ASTM D217   60-70mm
Flash point, C.O.C., °F                                  ASTM D92    300° F (148°C) minimum
Color: Gray
Percent Solids: 99% 

Contact ConSeal for appropriateness of individual applications.

Not for use in expansion joints or joints that move.

TECHNICAL DATA

MaterialConcentrationResult Recommendation
Gasoline100%  No DegradationProper Application
Jet A Fuel100%  No DegradationProper Application
JP-4 Fuel100%  No DegradationProper Application
JP-8 Fuel100%  No DegradationProper Application
Kerosene100%  No DegradationProper Application
Motor Oil100%  No DegradationProper Application
Transmission Fluid100%  No DegradationProper Application
Brake Fluid100%  Some SwellingLimited Exposure or After 45 Days low level concentrations may not effect sealant
Cooking Oil100%  No DegradationProper Application
Mineral Spirits100%  No DegradationProper Application
Methyl Ethyl Ketone100% Swelling, CrackingInappropriate Application
Tolune100% Swelling, CrackingInappropriate Application
Tri Chlorethane100% Swelling, CrackingInappropriate Application
Alcohol100%  No DegradationProper Application
Anti Freeze100%  No DegradationProper Application
Runway De-Icers100%  No DegradationProper Application
Cleaning Detergents100%  No DegradationProper Application
Insecticides100%  No DegradationProper Application
Fertilizers100%  No DegradationProper Application
Acrylic Acid, Glacial100% Swelling, CrackingInappropriate Application

Letter of Conformance Letter   

LIMITED WARRANTY

This information is presented in good faith, but we cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combinations for their own purposes. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for this own particular use. We sell this product without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of this product, whether used alone or in combination with other products.