APPLICATIONS 

For: Manholes, Concrete Vaults, Septic Tanks, Concrete Pipe, Box Culverts, Utility Vaults, Burial Vaults, Vertical Panel Structures and a variety of concrete structures. 

SEALING PROPERTIES 

• Provides permanently flexible watertight joints.
• Low to high temperature workability: 30°F to 120°F (-1°C to 48°C)
• Rugged service temperature: -30°F to +200°F (-34°C to +93°C)
• Excellent chemical and mechanical adhesion to clean, dry surfaces.
• Sealed Joints will not shrink, harden or oxidize upon aging.
• No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application. 

HYDROSTATIC STRENGTH

SPECIFICATIONS

ConSeal CS-102 meets or exceeds the requirements of Federal  Specification SS-S-210 (210-A), AASHTO M-198B, and ASTM C-990-91.  

Not for use in expansion joints or joints that move.  

PHYSICAL PROPERTIES 

IMMERSION TESTING 

• 30-Day Immersion Testing: No visible deterioration when tested in 5% Caustic Potash, 5% Hydrochloric Acid, 5% Sulfuric Acid, and 5% saturated Hydrogen Sulfide. *
• One Year Immersion Testing: No visible deterioration when tested in 5% Formaldehyde, 5% Formic Acid, 5% Sulfuric Acid, 5% Hydrochloric Acid, 5% Sodium Hydroxide, 5 Hydrogen Sulfide and 5% Potassium Hydroxide.
• Requirements of ASTM C-990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants. 

Letter of Conformance Letter

LIMITED WARRANTY

This information is presented in good faith, but we cannot anticipate all conditions under which this information and our products, or the products of other manufacturers in combination with our products, may be used. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products, either alone or in combination with other products. Users are advised to make their own tests to determine the safety and suitability of each such product or product combinations for their own purposes. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for this own particular use. We sell this product without warranty, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of this product, whether used alone or in combination with other products.